There are many categories of self -spray paint products. According to different solvents, it can be divided into oily self -spray paint and water spray paint. Its scope of use is also very broad. The local repair and civilian renovation and color renovation of industrial products are involved. It is repairing paint flaws, molds, engineering machinery, toys, crafts, instruments, buildings, steel structures, advertising industry, logo, graffiti, etc. In various industries, we can see self -spray paint.

However, even if the different series of self -spraying paint of the same brand, the thickness of the nozzle or the pressure of gas tanks will be different. Many people cannot grasp how to use them correctly when they first use themselves. In the long run, some people even feel that it is difficult to use by spray paint.

In order for everyone to better master the use of self -spray paint

Let’s talk with you today

The use of self -spray paint

1. How to quickly adapt to the feeling of self -spray paint

Speaking of adapting to the feel of self -spraying paint, first when we get a can of self -spray paint, we should first weigh the weight of the tape -spray paint. Basically Differences. (If you want to complete a work, it is best to use the same brand of self -spray paint, so that it will not be colored, incompatible, etc.)


We need to find a open space to practice with waste walls or iron plates.

Put the index finger at the place where the nozzle is pressed, and slowly increase the intensity until the paint can be sprayed, press the press several times, and then remember that the intensity starts the paint. how many. Then move slowly, try it away, so that it will help you master the thickness of the lines in the back. After being familiar with the intensity of self -spraying paint, you will not start painting too late.

2. How to use self -spray paint

1. Repeat the bottle body for about 30 seconds before the formal spraying, so that the contents inside can be stirred to make the paint fully mix.

2. Keep a distance of about 20-30 cm during the spray painting process. It is easy to produce bubbles and accumulation when it is too close.


3. In the process of spraying, it should be done in one go in one go. The method of scanning thin coating, that is, move the scanning in the left and right, up and down methods


Do not spray repeatedly with only one position, which will cause streaming and affect the entire effect. It is not possible to spray very thick at once. When the self -spray paint is used, pay attention to spray a thin layer each time, and then spray the next layer after each spray. It may be that when you spray the first layer, you will feel that the location is not evenly covered. In fact, this is normal. When the first layer is dry, it can be completely covered without worry.


4. If the dark base material needs to be changed to light color, then use a white self -spray paint to bottom out. After the white paint is dry, spray a layer of color, so that the coloring effect is better, and it is more saved.

5. Pay attention to the use of wallpaper knives and transparent tapes and beautiful patterns during the spraying process. (These small tools can help you determine the area of ​​the area you need. After all, due to the spraying problem of spray paint, the edge of the spray paint will not be smooth, and it is difficult to achieve the accurate range standard we want. The effect, the wallpaper knife is also very useful, which can help us quickly divide the boundary.)

6. If there is paint in the spray paint jar after use, you can keep it on the next time. The saving method is very simple. Spray it a few times. When the nozzle can only spray qi fog, there is no color, you can positive, you can put it on the right place. Put in a cool place.