Today, the carpenter circle, sharing is the production method of Zhang Jianping’s solid wood TV cabinet. First design the style of the TV cabinet, as well as the size and process requirements according to the customer’s needs. According to the design, the tenon -and -mortise frame structure of the TV cabinet is made, and then the cabinet door of the entire cabinet is stitched with a wooden board, and then the door of the cabinet door is made with a grinding grinding machine. Finally, the production process of installing, polishing and wood wax oil.

实木电视柜的制作方法,亮点是弧面柜门,原来电视柜可以这样做!

step 1

实木电视柜的制作方法,亮点是弧面柜门,原来电视柜可以这样做!

The

实木电视柜的制作方法,亮点是弧面柜门,原来电视柜可以这样做!

Design of TV cabinet

The TV cabinet design is 2100mm, 450mm width, and 680mm in height. The wood chooses red oak. Designed as a floor cabinet -type TV cabinet, this is a very typical TV cabinet shape, with simple and beautiful appearance, suitable for simple -style home decoration. Especially the arc treatment of the cabinet door panel is also very smooth and attractive.

Step 2

Tenon -andon structure process

实木电视柜的制作方法,亮点是弧面柜门,原来电视柜可以这样做!

The structure of the TV cabinet uses the tenon -and -mortise structure. I think that only the furniture of the tenon -and -mortise structure is used, can the last piece of soul furniture. If the furniture structure made of nails and glue is easily distorted and changed the angle. The combination of mortise and tenon will not be distorted, and it is strong and durable, but the requirements for the production process of tenon -and -mortise are relatively high.

实木电视柜的制作方法,亮点是弧面柜门,原来电视柜可以这样做!

Step 3

Stereo panel production

The panel of the TV cabinet is stitched with three long wooden boards. The method of stitching can be worn with a tenon or tongue slot. Because the wooden board is long, we use a tenon here. After stitching the panel, use a pencil to draw the wavy lines, and the lines should be smooth. Then hold the grinding grinding machine and move the lines of the wavy line, sand out of the three -dimensional shape. When sand grinding, quickly move the sand wheel corner grinding machine according to the line shape.

Step 4

实木电视柜的制作方法,亮点是弧面柜门,原来电视柜可以这样做!

Gouring wood wax oil

实木电视柜的制作方法,亮点是弧面柜门,原来电视柜可以这样做!

After the shape of the panel is ready, you can start polishing with sandpaper. First, use 180 ~ 240 mesh sandpaper in turn in the direction of the wood grain. Generally, you can use 400 mesh sandpaper. After polishing, remove the wood chips in the wood grain in the direction of the wood grain. Of course, it is even better if you use electric tools such as air pumps.

实木电视柜的制作方法,亮点是弧面柜门,原来电视柜可以这样做!

Next, start with wood wax oil. First, use cotton cloth to evenly apply wood wax oil along the direction of wood texture. After drying slightly, wipe it out with uneven woodwax oil on the surface, so that the surface of the wood is smooth, so that the surface of the wood is smooth. Essence After the surface is dry, use 600 ~ 800 mesh sandpaper to polish and smooth. Apply brush once or twice, and the brush is completed. After the cabinet is dry, use cotton or polishing wheels to polish.

Step 5

实木电视柜的制作方法,亮点是弧面柜门,原来电视柜可以这样做!

Completed!

The biggest highlight of this TV cabinet is the door of the curved cabinet and the simple shape design. The original TV cabinet can also be done! Then apply natural and environmentally friendly wood wax oil to allow it to penetrate inside the wood, moisturize and maintain wood, and closely combine with wood fibers to form a protective film to enhance the hardness of the cabinet surface. And the shape is very beautiful, which can well show the new trend of an era.

The

The

The

实木电视柜的制作方法,亮点是弧面柜门,原来电视柜可以这样做!

The