I. Introduction

In the past two years, smart homes have finally ushered in explosive growth. With the entry of major manufacturers Ali, Baidu, Tencent and Xiaomi, it has greatly reduced the entry threshold for smart homes, so that smart home products can simply and conveniently enter thousands of homes. Thousands of households. If you haven’t felt the convenience and speed of smart homes, then we start with the simplest lighting control, and even old houses can achieve lighting automation. Let’s follow the original poster.

智能家居不求人,小白也能实现照明自动化,智能墙壁开关安装指导

Second, preparation work

智能家居不求人,小白也能实现照明自动化,智能墙壁开关安装指导

Warning: Since this construction involves 220V AC operations, please be careful, and it is strictly forbidden to construction under the condition of power! Intersection Intersection Intersection

智能家居不求人,小白也能实现照明自动化,智能墙壁开关安装指导

In fact, the control of intelligent lighting is very simple. As long as it can control the wall switch, it can be achieved. Therefore, the mainstream solutions of the current lighting control are achieved by replacing the wall smart switch. Therefore, we need to prepare the following equipment for replacement:

智能家居不求人,小白也能实现照明自动化,智能墙壁开关安装指导

1. Green rice AQARA wall switch (ZigBee single fire double key version)

The core device of smart light control is used to replace the original wall switch. It should be noted that we want to buy a single fire line version, because the wall switch of the old house basically does not have zero lines, so it can only be used by a single fire line version.

This year’s Double Eleven This switch is special price to around 150, and the landlord purchased two more, and continued to supplement the light control in the home

▼ This is this switch

▼ The front of the switch, the protagonist of our transformation today

▼ The place where the back wiring

2. Mijia (Mijia) Mijia Multifunctional Gateway

Since the AQARA wall switch is connected by the ZigBee protocol, it cannot be directly controlled. Therefore, we need the Mijia multifunctional gateway to link the AQARA wall switch. Mijia multifunctional gateway is equivalent to a bridge, and it is also a control unit, which is essential!

▼ It’s him, this is the Mijia multifunctional gateway

智能家居不求人,小白也能实现照明自动化,智能墙壁开关安装指导

Of course, you can also use the Mijia Air Conditioning partner to replace the multifunctional gateway, which can achieve the same function

3. Digital indication electric pen/test pencil

智能家居不求人,小白也能实现照明自动化,智能墙壁开关安装指导

There is no need to buy a pen -to -test pen, and there is no need to buy it. Generally, there will be this thing in the tool box suit. But if you do n’t have it, it is strongly recommended to buy one before construction. You must know that there is no small matter for electricity. You must buy for your own safety! Must buy! Must buy!

智能家居不求人,小白也能实现照明自动化,智能墙壁开关安装指导

3. How to replace the smart switch

Below we will start the replacement of the wall switch, and then emphasize that there is no small matter for electricity! It is strictly forbidden to bring the operation! It is strictly forbidden to bring the operation! It is strictly forbidden to bring the operation!

智能家居不求人,小白也能实现照明自动化,智能墙壁开关安装指导

1. The most important step

Find your strong electric box and turn off the air switch that controls the light all the way. If you ca n’t find which one is empty, you can close the total gate! Intersection Intersection Intersection In addition, you must make sure that the bear child is closed when you operate the construction, that is, the strength is cheating! Intersection Intersection Intersection Intersection Intersection Intersection Intersection Intersection Intersection

智能家居不求人,小白也能实现照明自动化,智能墙壁开关安装指导

▼ Like the landlord, turn it off empty

智能家居不求人,小白也能实现照明自动化,智能墙壁开关安装指导

PS: After the air switch is turned off, the lights are turned on and then confirmed whether it is really dead! Intersection Intersection Intersection Intersection Intersection Intersection

2. Disassemble the original wall switch

▼ First of all, we need to remove the panel of the original switch and find it carefully around your switch. You must find a small groove similar to the red circle. You can open the front board with a screwdriver gently.

智能家居不求人,小白也能实现照明自动化,智能墙壁开关安装指导

▼ After opening the front panel, you can see the fixed screws of the switch, the screw is unscrewed, and the panel can be removed.

智能家居不求人,小白也能实现照明自动化,智能墙壁开关安装指导

▼ After the panel is removed, do not rush to disassemble the wires. First, use the test pen to confirm whether there is electricity. The safety is the most important! Intersection Intersection

▼ This switch was originally controlled by the LV wireless switch, and now it is ready to change AQARA

▼ It is confirmed that there is no power, you can remove the original switch

The original poster has a total of 4 street lights, so there are 5 wires in the switch panel (1 fire line+4 street light control fire line). Generally speaking, the fire line is red wire, just like the landlord’s fire line in the picture above is the fire line of the landlord in the picture above is the fire line of the landlord in the picture above. The red line, the others are all control lines. Of course, if you are uncertain, you can use the air to test which wires are used to use the test pen to test the electric line at this time. After the test, please disconnect open! Intersection

3. How to install the AQARA wall switch

智能家居不求人,小白也能实现照明自动化,智能墙壁开关安装指导

▼ First of all, we also need to open the front panel of the AQARA wall switch, and you can also open it with a screwdriver with a screwdriver.

▼ Open the front panel looks like

▼ Then we can see that there are three screws on the upper part of the switch. This is a screw used to fix the wiring. What we need to do is to unscrew these three screws

▼ Note that there are three wiring holes on the back of the switch. Our wires need to be inserted in all, but please note that there is a logo L, L1, L2 on each wiring hole. Do not insert it wrong, especially the fire line, the line we found before must be inserted into the L hole! Intersection Intersection Intersection

▼ First of all, we insert the line of the fire into the L hole and lock the screw! Intersection Intersection Don’t make mistakes, it must be L hole

▼ After that, the other 2 control lines are inserted into L1 and L2 respectively, and the corresponding screws are also locked.

▼ After that, we pushed the switch back to 86 boxes, locked the fixed screws, and closed the air switch to power. Don’t worry about installing the front panel. Let’s test it first. Press the small dots below with a screwdriver to see if the light can be turned on.

▼ When the AQARA wall switch is turned on, the corresponding small light will light up, which means that the work is normal.

智能家居不求人,小白也能实现照明自动化,智能墙壁开关安装指导

▼ Finally, the front panel will be replaced and replaced

智能家居不求人,小白也能实现照明自动化,智能墙壁开关安装指导

▼ AQARA’s wall switch value is still very high.

智能家居不求人,小白也能实现照明自动化,智能墙壁开关安装指导

Fourth, how to connect the smart switch to the smart home system

智能家居不求人,小白也能实现照明自动化,智能墙壁开关安装指导

After the AQARA wall switch is installed, we can connect the Mijia ecosystem, download the Mijia APP, and follow the guidance of the APP to easily connect.

智能家居不求人,小白也能实现照明自动化,智能墙壁开关安装指导

▼ First of all, in the additional device, select the AQARA single fire line wall switch we want to add

▼ According to the prompts, select the gateway we want to switch links (we have already said that the smart switch needs to be connected through the ZigBee protocol and the gateway, and the gateway is connected to the network via WIFI)

智能家居不求人,小白也能实现照明自动化,智能墙壁开关安装指导

▼ Then follow the prompts, long press the key for 10 seconds and the connection can be completed.

▼ After finishing, we can see in our device list, the newly added wall switch

智能家居不求人,小白也能实现照明自动化,智能墙壁开关安装指导

▼ If you click on a switch casually, you can see the remote control of the app, and at the same time, you can see the opening or closing of the lighting

5. Setting logic and application of family lighting automation

The automation of family lighting requires the cooperation of other sensors to achieve, such as human sensors, doors and windows open and closing sensors, light sensors, etc. Under the cooperation of the above sensors, the following basic logic control can be achieved

智能家居不求人,小白也能实现照明自动化,智能墙壁开关安装指导

1. Automatically turn on and turn off the lights

This logic is mainly achieved in conjunction with the human sensor. It automatically turns on the lighting of the corresponding area by inducing the human body to move the lights, and delay the lighting when there is no one. The main application scenarios are bathrooms, cloakrooms, and porch areas.

▼ For example, this set of automation of the landlord is the most typical bathroom lighting automation. Combine the human sensor to automatically turn on the light and delay 5 minutes off the light. (PS: Since the human sensor can only detect moving objects, it will be judged as no one in the toilet. In order to avoid this embarrassing occurrence, we can also add a doors and windows to the toilet lid to open the sensor and increase it to increase it. A judgment condition, that is, do not perform the light turnover operation when the toilet lid is turned on)

2. Timing switching lights

智能家居不求人,小白也能实现照明自动化,智能墙壁开关安装指导

In some specific scenarios, we can control the lights to turn on and off regularly. For example, if you work in a fixed time, we can automatically turn on the night light at a certain period of time (23: 00-24: 00). Every night, there are warm lights to welcome your home. The typical application scenario is the outbound area, the porch area, the corridor area, etc.

智能家居不求人,小白也能实现照明自动化,智能墙壁开关安装指导

▼ This set of automation is the simplest time lighting control

3. Automatic switching light according to the light in the room

智能家居不求人,小白也能实现照明自动化,智能墙壁开关安装指导

In addition, we can also cooperate with the light sensor (multi -functional gateway or AQARA human sensor all have light sensors) to achieve lighting automation according to the degree of light and darkness. Typical application scenarios can be a variety of rooms with windows, avoid automatic opening of waste power from the daylight. Generally speaking, the most important application of this logic is the control of night lights.

▼ This set of automation of the landlord is a typical night light control logic, which is convenient for the landlord to go to the toilet at night. The turnover condition of the night light is to turn on the low darkness and the conditions of some people’s activities. It avoids the night lights turned on during the day or at night.

4, others

There are many other gameplay of family lighting, mainly with different sensors. For example, you can also cooperate with the doors and windows sensors to turn on the mysterious light at the moment of opening the door; cooperate with the fingerprint lock, turn on the mysterious light when the door is opened at a specific fingerprint;

智能家居不求人,小白也能实现照明自动化,智能墙壁开关安装指导

PS: In addition, all of the above operations can be connected to Xiaomi AI speakers to achieve voice control. That is to say, the lighting of the whole house can be controlled by the cooperation of the Xiaomi AI speaker.

Six, ending

Home lighting automation is the most basic part of smart home control. The convenience of its realization is still very high, and it is difficult to get started. Therefore, friends who are interested in smart homes can choose to start with lighting automation and experience the fun of smart homes!

If you like this article, please don’t forget to play, collect, comment, and like it. Your support is the biggest motivation for my post! Intersection Intersection

智能家居不求人,小白也能实现照明自动化,智能墙壁开关安装指导

Warning: Since this construction involves 220V AC operations, please be careful, and it is strictly forbidden to construction under the condition of power! Intersection Intersection Intersection

Warning: Since this construction involves 220V AC operations, please be careful, and it is strictly forbidden to construction under the condition of power! Intersection Intersection Intersection